ATEN VE600 - DVI Video Extender User Guide

Table of Contents

Package Contents

1 VE600L (Local Unit)
1 VE600R (Remote Unit)
1 DVI-D/Audio Cable (1.8m)
2 Power Adapters1 User Guide

Package Contents - VE600L / VE600R Front View
VE600L / VE600R Front View

Package Contents - VE600L / VE600R Rear View
VE600L / VE600R Rear View

A DVI graphic controller or card having a DVI-D port. It should support the maximum display resolution of the display to be connected.
A mini stereo audio output jack (optional)

Use DVI-D cables to connect the video source and display device to the DVI Video Extender.
Use Cat 5e or Cat 6 cabling to connect the VE600L to the VE600R. (Cat 5e and Cat 6 cabling must be purchased separately.) The maximum cabling distances are as follows:
Cat 5e – 25m
Cat 6 – 30m

Installing the DVI Video Extender involves the following steps:

Before beginning the installation procedure ensure that all equipment to be connected is powered off.
To prevent damage to your installation, make sure that all devices are properly grounded.

Hardware Installation - Diagram

Connect one end of the supplied DVI/Audio combo cable to the DVI port and speaker jack on the source device (e.g. computer or DVD player).
Connect the other end of the DVI/Audio combo cable to the DVI-D port and SPEAKER port on the VE600L.
Connect the two ends of a Cat 5e or Cat 6 cable to the REMOTE I/O ports on the VE600L and VE600R.
Plug the monitor's DVI cable into the DVI-D port on the VE600R.
Plug the speakers into the SPEAKER port on the VE600R.
Slide the DISPLAY RESOLUTION switch to SXGA if the monitor supports resolutions only up to 1280 x 1024 (SXGA) or 1080i (HDTV). Slide the switch to UXGA if the monitor supports resolutions higher than 1280 x 1024 (SXGA).
Plug one of the supplied power adapters into an AC power outlet, and then connect its power cable to the VE600R.
Plug the other supplied power adapter into an AC power outlet, and then connect its power cable to the VE600L.
Turn on the source and display devices.

To improve video quality over long distances, try sliding the PICTURE COMPENSATION switch to EQ ON.

Function			VE600L	VE600R
Computer Connection			1	N/A
Console Connection			N/A	1
Connectors	Computer Port	Video	1 x DVI-D Female (White)	N/A
		Speaker	1 x Mini Stereo Jack Female (Green)	N/A
	Console Port	Video	N/A	1 x DVI-D Female (White)
		Speaker	N/A	1 x Mini Stereo Jack Female (Green)
	Link		1 x RJ-45 Female
	Power		1 x DC Jack
Switch	Display Resolution		1 x Slide	N/A
	Picture Compensation		N/A	1 x Slide
LEDs	Power		1 (Orange)
Video			1280 x 1024 @ 60Hz; 1080i; DDC2B
Power Consumption			DC 5.3V, 6.5W
Environment	Operating Temp.		-5–50°C
	Storage Temp.		-25–65°C
	Humidity		0–85% RH, Non-condensing
Physical Properties	Housing		Metal
	Weight		0.20 kg
	Dimensions (L x W x H)		11.90 x 8.60 x 2.30 cm