Table of Contents
Advertisement
2.7
USB mobile dongle connection
Mobile network can be used with a specific USB dongle. An additional PoE injector is
needed for power supply. Make sure to connect the gateway using an ethernet cable to
the port labelled as "PoE", on the injector.
Or alternatively, a 12V – 2A adapter (see 2.1 Prerequisites for installation on page 5).
DOCUMENT ID
4MWA000032
© Copyright 2023 ABB. All rights reserved.
Figure 11 Mobile network configuration for PoE
Figure 12 Mobile network configuration for 12V adapter
REV.
B
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
DATE
February 2023
LANG.
PAGE
EN
16/29
Advertisement
Table of Contents
