AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY General The ABB Ability™ Smart Sensor gateway is used to upload the Smart Sensor data automatically to the Smart Sensor portal. The gateway needs to be configured for Internet access before it can start reading the Smart Sensors.
Page 21
Connection to Access Controller can be verified with Debug Tools in Other tab: To check the connection to the Access Controller, select NetCat, add Address gw.smartsensor.abb.com (or gw.smartsensor.abb.com.cn in case of China), Pro- tocol TCP, Timeout 2, Port 8883 and press Start.
Page 22
Connection to Smart Sensor Portal can be verified as well with Debug Tools in Other tab: To verify TCP port open/close status select NetCat, add Address smartsen- sor.abb.com (or smartsensor.abb.com.cn in case of China), Protocol TCP, Timeout 2, Port 443 and press Start. Wait for the black screen with the result to appear below.