Connection to Smart Sensor Portal can be verified as well with Debug Tools in Other
tab:
To verify TCP port open/close status select NetCat, add Address smartsen-
-
sor.abb.com (or smartsensor.abb.com.cn in case of China), Protocol TCP,
Timeout 2, Port 443 and press Start. Wait for the black screen with the result to
appear below.
-
If you receive a message containing the text "... 443 (https) open", the connec-
tion for measurement upload should work.
DOCUMENT ID
4MWA000032
© Copyright 2023 ABB. All rights reserved.
Figure 19 Test connection to Smart Sensor Portal
REV.
B
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
DATE
February 2023
LANG.
PAGE
EN
22/29