Table of Contents
Advertisement
Connection to Access Controller can be verified with Debug Tools in Other tab:
To check the connection to the Access Controller, select NetCat, add Address
-
gw.smartsensor.abb.com (or gw.smartsensor.abb.com.cn in case of China), Pro-
tocol TCP, Timeout 2, Port 8883 and press Start.
Wait for the black screen with the result to appear below.
-
-
If you receive a message containing the text "... 8883 (?) open", the gateway sta-
tus should be properly sent to the AC.
DOCUMENT ID
4MWA000032
© Copyright 2023 ABB. All rights reserved.
Figure 18 Test connection to Access Controller
REV.
B
AB B ABI LIT Y™ SM A RT S ENSO R BLU ETOOTH ® G AT EWAY
DATE
February 2023
LANG.
PAGE
EN
21/29
Advertisement
Table of Contents
