Table of Contents
Advertisement
2.6
WIFI connection
The gateway can be configured to use an existing WIFI network. An additional PoE
injector is needed for power supply. Make sure to connect the gateway using an ethernet
cable to the port labelled as "PoE", on the injector.
Or alternatively, a 12V – 2A adapter (see 2.1 Prerequisites for installation on page 5).
From the Gateway Basic page select:
Connection Priority: Wi-Fi
-
Enter the SSID (name) of the WIFI network
-
Enter the WIFI network password
-
Change the Wireless operation mode from Hotspot to Client
-
IP Allocation: DHCP or Static (in case the IP allocation is given)
-
DOCUMENT ID
4MWA000032
© Copyright 2023 ABB. All rights reserved.
Figure 9 WIFI network configuration for PoE
Figure 10 WIFI network configuration for 12V adapter
REV.
B
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
DATE
February 2023
LANG.
PAGE
EN
14/29
Advertisement
Table of Contents
