NOTE! If the gateway's container is displaying the error status, resetting the gateway
will NOT solve this error. To check for the error status, please go into the gateway
settings page under the Container tab. In case this happens, please contact Smart
Sensor support.
For more support, please contact Smart Sensor support:
support.smartsensor@abb.com
DOCUMENT ID
4MWA000032
© Copyright 2023 ABB. All rights reserved.
Figure 27 Scanning for Smart Sensors
REV.
B
AB B ABI LIT Y™ SM ART S ENSO R BLU ETOOTH ® G AT EWAY
DATE
February 2023
LANG.
PAGE
EN
29/29