At&T Mobile Network Configuration - ABB Ability ATT-VZN SIM card ready gateway Installation Manual

A B B A B I L I T Y S M A R T S E N S O R B L U E T O O T H AT T- V Z N S I M C A R D R E A DY G AT E WAY I N S TA L L AT I O N M A N U A L
10
—
2 – Installation
2.6 AT&T mobile network configuration
The following items are required for AT&T mobile
network configuration:
• PROCET PoE injector as the power supply
(included in sales package)
• MultiTech MTCM-LNA3-B03 USB modem
(included in sales package)
• AT&T SIM card (purchased)
From the Gateway Basic Page:
• Select as Connection Priority: 3G/4G
• Select for USB Dongle Type: MultiTech MTCM-
LNA3-B03 for AT&T
• Type or confirm APN: 10569.MCS
• Type or confirm Service: umts
• Type or confirm Dial Number: *99***1#
AT&T mobile network configuration
Smart sensors
Gateway
USB modem
• Type or confirm Device: /dev/ttyACM0
• Select Peer DNS: 1
Press Apply at the bottom of the screen.
From the Gateway Other page:
• Scroll down to the Actions section.
• Click on the Reboot button.
• Wait for the reboot to finish.
NOTE! With a USB dongle the gateway needs to be
in place where there is a good network coverage.
PoE injector
Mains socket