Reset From Web Interface (Reset Type); Change Log - Grandstream Networks HT813 Administration Manual

Hide thumbs Also See for HT813:
Table of Contents

Advertisement

Key
Mapping
C
2222
D
33 (press the "3" key twice, "D" will show on the LCD)
E
333
F
3333
For example: if the MAC address is 000b8200e395, it should be keyed in as "0002228200333395"

Reset from Web Interface (Reset Type)

1. Access your HT813 UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings �� Reset Type
5. Press Reset button (after selecting the reset type).
Full Reset: This will make a full reset
ISP Data: This will reset only the basic settings, like IP mode, PPPoE and Web port
VoIP Data Reset: This will reset only the data related with a service provider like SIP server, sip user ID, provisioning,
and others.
Factory Reset will be disabled if the "Lock keypad update" is set to "Yes".
If the HT813 was previously locked by your local service provider, pressing the RESET button will only restart the unit. The
device will not return to factory default settings.

CHANGE LOG

This section documents significant changes from previous versions of admin guide for HT813. Only major new features or
major document updates are listed here. Minor updates for corrections or editing are not documented here.
Firmware Version 1.0.15.7
Added support for Always send HTTP Basic Authentication Information.
Information]
Added Sectigo CA and Charter CA to the Trusted CA Certificate List.
Added support for Ring frequency 25Hz on FXS port.
Updated the "Let's encrypt" root CA certificate.
Added support for SRTP Key Length.
Updated Syslog and make it more user-friendly.
Reorganized the order of display of the software version on the status page.
Added support for variable on Provisioning link.
Added feature Configuration File Types Allowed.
Added support of DHCP Option 150.
Added SSL Key Log File.
Table 12: MAC Address Key Mapping
[Load CA
[SRTP Key
Length]
[Syslog
[Enable using tags in the
[Configuration File Types
[Additional Override DHCP
[With Secret Key
Information]
[Always send HTTP Basic Authentication
[Load CA
Certificates]
[Ring
Frequency]
Certificate]
level]
[Software
URL]
Allowed]
Option]
version]

Advertisement

Table of Contents
loading

Table of Contents