Grandstream Networks HT813 Administration Manual page 21

Randomize
Randomized Automatic Upgrade within the range of hours of the day or postpone the upgrade every X
d
Automatic minute(s) by random 1 to X minute(s).
Upgrade
Always
Configures the HT813 to always search for the new firmware at boot up. During the boot stage, the HT813 will
Check for
New contact the firmware upgrade server to search for a new firmware, when available it will start the upgrade
Firmware process, otherwise it will boot normally.
at Boot up
Check New
Firmware
only when Configure the HT813 to search for the new firmware when the firmware prefix / suffix changes. When this
F/W option is selected, the HT813 will check for updates only when the pre/suffix has been changed.
pre/suffix
changes
Always
Skip the Configures the HT813 to skip the firmware check when this option is selected the HT813 will always skip
Firmware searching for a new firmware.
Check
Configurati
allows users to configure provision configuration file type in xml file only or all file types.
on File
Types Default value is "All"
Allowed
By default, device will provision the first available config in the order of cfgMAC, cfgMAC.xml, cfgMODEL.xml
Download
and cfg.xml (corresponding to device specific, model specific and global configs). If this option is enabled, the
and
HT813 will inverse the downloading process to cfg.xml > cfgGSC3570.xml > cfgMAC.bin > cfgMAC.xml. The
Process All
following files will override the files that has already been loaded and processed.
Available
The default value is "No"
Config
Note: Support for the new override config file option as "cfgMAC_override.xml" file has been added to the
Files
HT813 Model.
Disable SIP
Disables the SIP NOTIFY Authentication on the ATA adapter. If set to "Yes", the ATA adapter will not challenge
NOTIFY
Authenticat NOTIFY with 401. Default is No
ion
Authenticat Authenticates configuration before being accepted. This protects the configuration from unauthorized
e Conf File modifications. Default is No.
Validate This feature allows users to validate server certificates with our trusted list of TLS connections. Default is
Server enabled.
Certificates The device needs to reboot after changing the setting.
Trusted CA
Certificates Configures the entry of the first Trusted CA certificate
A
Trusted CA
Configures the entry of the second Trusted CA certificate.
Certificates
B
Load CA This feature allows users to specify which CA certificate to trust when performing server authentication.
Certificates Available settings: Built-in trusted certificates, Custom trusted certificates and All trusted certificates.
The default is Built-in trusted certificates.
Note: "Let's encrypt" root CA certificate has been updated on the firmware release 1.0.15.7