Setting The Daily Alarms; Switching Off The Alarm Signal - Youshiko YC9333 Quick Start Manual

When adjusting the value, press and hold the 【+】or 【-】key to adjust

continuously and quickly.

Setting the daily alarms:

 Press once 【
press again to display
(Alarm1 OFF), Alarm1&Alarm2 ON. Press 【
"and"
all OFF (no"
 Press once 【ALARM】 button, LCD display alarm1 time, press 【ALARM】 button
again, LCD display alarm2 time, press 【ALARM】 button again,
 Press and hold ALARM
starts to flash. Use the 【+】 and 【-】 buttons to set the required hour.
 Press 【ALARM】 button to confirm your setting, the Minute of the Alarm1 time
starts to flash. Use the 【+】 and 【-】 buttons to set the required minute.
 Press 【ALARM】 button to confirm your setting, the hour of the Alarm2 time starts
to flash. Use the 【+】 and 【-】 buttons to set the required hour.
 Press 【ALARM】 button to confirm your setting, the minute of the Alarm2 time
starts to flash. Use the 【+】 and 【-】 buttons to set the required hour.
 Press 【ALARM】 button to confirm your setting and to end the setting procedure.
F.Y.I.:
 If there is no valid operation within 20 seconds, it will automatically return to normal
time mode from the alarm time set mode.
When adjusting the value, press and hold the 【+】or 【-】key to adjust

continuously and quickly
 The alarm will sound for 2 minutes if you do not deactivate it by pressing any button.
In this case the alarm will be repeated automatically after 24 hours.
 Rising alarm sound (crescendo) changes the volume 4 times whilst the alarm signal is
heard.
Switching off the alarm signal
 When the alarm is ringing, press any button except the 【Light/SNZ】 button to stop
the alarm signal. It is not necessary to reactivate the alarm. It will ring again this time
button, LCD will display
】
, each to represent Alarm1ON (Alarm2 OFF), Alarm2 ON
"
display).
button for 3 seconds,
, press again to display
button again to Alarm1 and Alarm2
】
return to time display.
until the hour of the Alarm1 time
,