Inspired Flight IF1200 User Manual page 43

IF1200 User Manual
Step
Place the first Waypoint:
1. In the Plan Tools, select Waypoint (#1 below).
2. Place the cursor on the map for the desired Waypoint location (#2 below),
7
then select it
3. Notice that the Waypoint panel appears on the right side of the screen when
Waypoint was selected in the Plan Tools panel.
Use the steps described in the previous step to add more waypoints as desired.
Note: Waypoints may be deleted by selecting the trashcan icon at the top of the
8
Waypoint panel.
Example Mission, Continued
IFT Doc. Num. 102090, Rev. 3.00
Action
Continued next page
Figure 19. Adding Waypoints
17. Planning a Mission
Page 40