Table of Contents
Advertisement
Performer Cyc Q6
DMX Address
In this menu you can set the DMX starting address of the device.
The adjustment range is between 001 and 493/500/503/505/506/510, depending on the currently
selected DMX channel mode. See 6.6.4. Personality (DMX Channel Modes) on page 24 for more
information.
Press the UP/DOWN buttons to select a DMX starting address.
Press the ENTER button to confirm.
Run Mode
In this menu you can set the control mode of the device.
Press the UP/DOWN buttons to select one of the following 2 options:
●
DMX:
●
SLAVE:
Press the ENTER button to confirm.
Product code: 33170
The device will operate in DMX mode.
The device will operate as a slave in Master/Slave mode. It means that it will react
the same as the master device.
23
Advertisement
Table of Contents
Need help?
Do you have a question about the Performer Cyc Q6 and is the answer not in the manual?
Questions and answers