Page 2
For more information: iwant@showtec.info You can get some of the best quality, best priced products on the market from Showtec. So next time, turn to Showtec for more great lighting equipment. Always get the best -- with Showtec ! Thank you!
Showtec Showtec Centron LED DMX Product Guide ™ Warning.................…...……………..…………………………….………… Safety-instructions……………………………………………………………………………………………………… Operating Determinations.…………………………………………………………………………………………... Rigging.…………………………………………………………………………………………………………………... Return Procedure……………………………………………………………………………........Claims……………………………………………………………………………............Description................…...………………………………………….……….. Features and Overview ………………………………...….……………….………….……….……….…………… Set Up and Operation..............……..……………………………………………. Control Modes…………………………………………………………………………………………………….…….. One Centron LED (Built-in Programs + Auto Run Mode)…..….……………….………………….………. One Centron LED (Sound Control)…………………………………………………………………..………...
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • Showtec Centron LED DMX including hanging bracket • IEC powercable 1,5m • User manual LED Expected Lifespan LEDs gradually decline in brightness over time.
Page 5
Allow time to cool down, before replacing lamp. The user is responsible for correct positioning and operating of the Centron LED DMX. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Always let the installation be carried out by an authorized dealer ! Procedure: If the Centron LED DMX is lowered from the ceiling or high joists, professional trussing systems have to be used. Use a clamp to mount the Centron LED DMX, with the mounting-bracket, to the trussing system.
Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.nl and request an RMA prior to shipping the fixture.
Before plugging the unit in, always make sure that the power supply matches the product specification voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa. Remove all packing materials from the Centron LED DMX. Check that all foam and plastic padding is removed.
Control Modes One Centron LED (Built-in Programs + Auto Run) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. When the Centron LED is not connected by a DMX-cable, it functions as a stand-alone device. Please see page 12 for more information about the built-in programs.
Multiple Centron LEDs (DMX Control) 1. Fasten the effect light onto firm trussing Leave at least 1 meter on all sides for air circulation. Always use a safety cable (ordercode 70140 / 70141). 3. Use a 3-p XLR cable to connect the Centron LEDs and other devices. 4.
Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
The Centron LED can be operated with a controller in control mode or without the controller in stand- alone mode. Control Panel Fig. 4 A. LCD Display D. Up Button B. CHOOSE button E. Down Button C. ENTER Button DMX Control Mode The fixtures are individually addressed on a data-link and connected to the controller.
Main Menu Options Built-in Programs Auto DMX address Slave Sound controlled 1. Built-in Programs 1) Press the MODE button on the device, until the display shows 2) With this menu you can set the Built-in Program Mode of the Centron LED. You can choose 23 built-in programs , by using the Up / Down buttons.
3. DMX Mode With this menu you can set the DMX address. 1) Press the MODE button, until the display shows 2) You can choose 512 different DMX addresses. Use the Up / Down buttons to select the required address from 3) You can also press the SETUP button to set a different DMX Mode 5 Channels 4 Channels...
DMX Protocol The Centron LED can be operated with a controller in control mode or without the controller in stand- alone mode. DMX Channels 5CH) Channel 1 - Programs No Function 1-10 Program 1 11-21 Program 2 22-32 Program 3 33-43 Program 4 44-54...
Page 17
DMX Channels 4CH) Channel 1 - Programs No Function 1-20 21-41 Green 42-62 Blue 63-83 Orange 84-104 White 105-125 Red + Green 126-146 Green + Blue 147-167 Blue + Orange 168-188 Orange + White 189-209 Red + Green + Blue 210-230 Red + Green + Blue + White 231-251...
Maintenance The Showtec Centron LED DMX requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a soft cloth.
Page 19
No Response to DMX Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card malfunction. 1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try your DMX control again. 2.