Set The Hot Water Capacity - Nibe VVM 500 User Manual

Using +Adjust, the installation communicates with the un-
derfloor heating's control centre* and adjusts the heating
curve as well as the calculated supply temperature according
to the underfloor heating system.
Here you can activate the climate systems you want +Adjust
to affect. You can also set how much effect +Adjust is to
have on calculated supply temperature. The higher the value,
the greater the effect.
*Support for +Adjust required
NOTE
+Adjust must first be selected in menu 5.4 "soft
inputs/outputs".
22 Chapter 3 | VVM 500 – at your service

Set the hot water capacity

OVERVIEW
Sub-menus
For the menu HOT
WATER there are
several sub-menus.
Status information for
the relevant menu
can be found on the
display to the right of
the menus.
temporary lux Activ-
ation of temporary increase in the hot water temperature.
Status information displays "off" or what length of time of
the temporary temperature increase remains.
comfort mode Setting hot water comfort. The status inform-
ation displays what mode is selected, "economy", "normal"
or "luxury".
scheduling Scheduling hot water comfort. The status in-
formation "set" appears if you have set scheduling but it is
not currently active, "holiday setting" appears if holiday
setting is active at the same time as scheduling (when the
holiday function is prioritised), "active" appears if any part
of scheduling is active, otherwise "off" appears.
advanced Setting hot water circulation (accessory is re-
quired)
MENU 2.1 - TEMPORARY LUX
Setting range: 3, 6
and 12 hours and
mode "off" and
"one time in-
crease"
Default value: "off"
When hot water requirement has temporarily increased this
menu can be used to select an increase in the hot water
temperature to lux mode for a selectable time.
Caution
If comfort mode "luxury" is selected in menu 2.2
no further increase can be carried out.
The function is activated immediately when a time period
is selected and confirmed using the OK button. The remain-
ing time for the selected setting is shown to the right.
When the time has run out VVM 500 returns to the mode
set in menu 2.2.
Select "off" to switch off
HOT WATER 2
temporary lux
comfort mode economy
scheduling active
advanced
temporary lux 2.1
off
one time
increase
3 hrs
6 hrs
12 hrs
temporary lux .
NIBE VVM 500
off