Contact With Smo; Set The Hot Water Capacity - Nibe SMO 20 User Manual

Set the hot water capacity

OVERVIEW
Sub-menus
temporary lux
comfort mode
scheduling
advanced
This menu only appears if a water heater is docked to the
heat pump.
For the menu HOT WATER
Status information for the relevant menu can be found on
the display to the right of the menus.
temporary lux Activation of temporary increase in the hot
water temperature. Status information displays "off" or what
length of time of the temporary temperature increase re-
mains.
comfort mode Setting hot water comfort. The status inform-
ation displays what mode is selected, "economy", "normal"
or "luxury".
scheduling Scheduling hot water comfort. The status in-
formation "set" appears if you have set scheduling but it is
not currently active, "holiday setting" appears if holiday
setting is active at the same time as scheduling (when the
holiday function is prioritised), "active" appears if any part
of scheduling is active, otherwise "off" appears.
advanced Setting periodic increase in the hot water tem-
perature.
MENU 2.1 - TEMPORARY LUX
Setting range: 3, 6 and 12 hours and mode "off" and "one
time increase"
Default value: "off"
off
one time
increase
3 hrs
6 hrs
12 hrs
20 Chapter 4 | SMO 20 – at your service
HOT WATER 2
off
economy
active
there are several sub-menus.
temporary lux 2.1
When hot water requirement has temporarily increased this
menu can be used to select an increase in the hot water
temperature to lux mode for a selectable time.
Caution
If comfort mode "luxury" is selected in menu 2.2
no further increase can be carried out.
The function is activated immediately when a time period
is selected and confirmed using the OK button. The remain-
ing time for the selected setting is shown to the right.
When the time has run out SMO 20 returns to the mode set
in menu 2.2.
Select "off" to switch off temporary lux
MENU 2.2 - COMFORT MODE
Setting range: smart control, economy, normal, luxury
Default value: normal
comfort mode 2.2
smart control
economy
normal
luxury
The difference between the selectable modes is the temper-
ature of the hot tap water. Higher temperature means that
the hot water lasts longer.
smart control: In this menu, you activate the Smart Control
function. The function learns the previous week's hot water
consumption and adapts the temperature in the water
heater for the coming week to ensure minimal energy con-
sumption.
If the hot water demand is greater, there is a certain addi-
tional amount of hot water available.
When the Smart Control function is activated, the water
heater delivers the reported performance according to the
energy decal.
economy: This mode produces less hot water than the oth-
ers, but is more economical. This mode can be used in
smaller households with a small hot water requirement.
normal: Normal mode gives a larger amount of hot water
and is suitable for most households.
luxury: Lux mode gives the greatest possible amount of hot
water. In this mode, the immersion heater is used to heat
hot water as well as the compressor, which increases oper-
ating costs.
.
NIBE SMO 20