Assembly & Commissioning Instructions; Instructions For Assembly; Head Rail Mounting; Foot Rail Mounting - Scaleo medical Shado 160 User Manual

Assembly & commissioning instructions
Unpack the parcel with the usual care. Remove the shower trolley from its box after having
unlocked the brake pedals.
One N°5 Allen wrench and one 13mm flat wrench are necessary (not provided).

Instructions for assembly

Head rail mounting

1. Take off the 4 locking nuts from the bolts.
2. Place the head rail in place and install the washers
and the bolts on each side of the rail.
3. Adjust the head rail and install the locking nuts.
4. Using a flat 13 mm wrench, tighten the locking nuts
until the head rail is completely blocked.
Please pay attention to the tilting control
cable during this assembly: do not pinch it or catch
it under the rail.

Foot rail mounting

The left side of the foot rail must be installed following
the same process as for the head rail:
1. Take off the 4 locking nuts from the bolts.
2. Place the foot rail in place and install the washers, the bolts and the locking nuts of the left
side of the foot rail.
12
Final result on a backrest model:
take care of the cable installation.
DOMU019_EN_v16_20221206_Shado® shower trolleys user manual