Table of Contents
Advertisement
3. The same procedures applies to the right side, but the drain hose hook must be installed
between the foot rail and the washers and licking nuts.
Left side installation of the foot rail
4. Using a flat 13 mm wrench, tighten the locking nuts until the rail is completely blocked.
5. Install the hose on the support.
Commissioning the Shado
Before first using a Shado® trolley electric model, it is highly recommended to perform a full charge
of the battery. Please refer to the "Battery management" section of this user manual for
instructions.
The Shado
®
E models are delivered with the emergency button placed in the "ON" position. Before
first use, make sure that the emergency stop button is released to "OFF" position. Refer to the
"Security devices" section of this user manual for further instructions.
DOMA019_EN_v16_20221206_Shado® shower trolleys user manual
Right side installation of the foot rail
®
shower trolley
13
Advertisement
Table of Contents
