Table of Contents
Advertisement
Installation and operation
Power supply connection
•
Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
•
Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
•
The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2
Operation
Appliance Preparation
1. Before first use of the appliance, disassemble all of its components off and clean
the appliance and the disassembled components following indications in section
6 'Cleaning and Maintenance'.
2. After cleaning, re-assemble the appliance and make sure that all components
are correctly fixed.
Appliance Start-Up
To switch the appliance on, perform the
following steps:
1. Make sure the ON/OFF switch is off.
2. Remove the water tank cover.
TIP!
To provide for correct operation of the
appliance, fill the water tank with filtered
water only.
900004
EN
Fig. 4
15 / 34
Advertisement
Table of Contents
