Bartscher 900004 Original Instruction Manual page 18

3. Fill the water tank with water to the MAX
marking, observing the fill level indicator.
ATTENTION!
Never use the appliance without water in
the water tank to avoid damaging the
heating element.
TIP!
Pour water slowly to make sure that the MAX marking is not exceeded. For
the first full filling of the water tank, 3.25 litres of water is needed.
4. Remove the tank lid.
5. Fill the tank with a beverage prepared n
accordance with the manufacturer's
instructions.
ATTENTION!
EN
Never exceed the 'MAX' marking of the
tank.
6. After filling with a beverage, close the
tank with the lid.
7. Make sure the plug is connected to a
right single socket.
8. Press the ON/OFF switch to start the
appliance.
The ON/OFF switch indicator light will light
up.
The stirrer blade moves and stirs beverage
in the tank.
The indicator light goes off when the
appliance is switched off with the ON/OFF
switch.
16 / 34
Installation and operation
Fig. 5
Fig. 6
Fig. 7
900004