6.2.7
Components Assembly
All cleaned and disinfected components should be carefully re-assembled and fixed
one by one in the appliance. Observe the following indications for each component.
Assembling and fixing the tank
CAUTION!
Before assembling the tank in the appliance, check if the gasket is
correctly inserted onto the tank. If the gasket is incorrectly fixed, liquid
may flow out and cause scalding!
EN
1. In Fig. 31 a correctly fixed gasket is
shown; it is arranged evenly along
the entire edge of the tank.
3. Wet the gasket with water.
4. Then insert the tank and press it
downwards.
TIP!
Do not use fat nor vaseline!
26 / 34
Fig. 31
Cleaning and Maintenance
Fig. 32
2. In Fig. 32 an incorrectly fixed gasket
is shown; in this case, the gasket is
NOT arranged evenly along the
entire edge of the tank.
Fig. 33
900004