Drain Tap Disassembly - Bartscher 900004 Original Instruction Manual

6.2.5

Drain Tap Disassembly

1. Remove the drain tap from the appliance, as described in section 6.2.3 'Drain
Tap Removal'.
1. Place the drain tap on a clean
surface and undo the fixing screw
(A) that fixes the tap to the
appliance. Remove the bolt (B)
with the spring (C).
EN
3. Remove the knob (E) by rotating it
counter-clockwise while holding the
rod.
24 / 34
Fig. 25
Fig. 27
Cleaning and Maintenance
Fig. 26
2. Pull the rod (G) completely until it
passes the knob (E) and, at the same
time, push the lever (F) from bottom
to top until the pin guide detaches.
Fig. 28
4. Remove the rod (G) and the spring
(H) from the drain tap housing (the
pin/gasket assembly (I) slides out
together with the rod).
900004