HikRobot SC2000E Series Quick Start Manual page 4

Korea Certification
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용
환경에서 사용하는 경우 전파간섭의 우려가 있습니다
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Provides additional information to emphasize or supplement important points
of the main text.
Indicates a potentially hazardous situation, which if not avoided, could result
in equipment damage, data loss, performance degradation, or unexpected
results.
Indicates a hazard with a high level of risk, which if not avoided, will result in
death or serious injury.
Available Model
This manual is applicable to the SC2000E Series Vision Sensor.
Safety Instruction
These instructions are intended to ensure that the user can use the device correctly to avoid danger
or property loss.
Caution:
● In the use of the device, you must be in strict compliance with the electrical safety regulations of
the nation and region.
● The device has a retinal blue light hazard. Do not observe the device in close range during its
operation.
● Protective measures like wearing safety goggles are required when installing, maintaining and
debugging the device.
● In the absence of proper protection, you should keep safety distance with the light source, or
avoid direct eye exposure with the light source during device installation, operation, and
maintenance.
● Do not connect multiple devices to the same power adapter, which may generate excessive heat
or cause a fire.
● Make sure that the power is switched off when installing or wiring the device.
● If the device emits smoke, produces a peculiar smell, or makes noise, please switch off the power
immediately, unplug the power cord, and contact the service center in time.
SC2000E Series Vision Sensor Quick Start Guide
your supplier or to a designated collection point. For more information see:
http://www.recyclethis.info
iii