Muse ML-655 BT - Splash Proof Portable Bluetooth Speaker Manual

Table of Contents

Contents

1 LOCATION OF CONTROLS
2 SETTING UP YOUR BLUETOOTH SPEAKER
3 POWER SUPPLY
4 TURNING UNIT ON/OFF
5 SELECTING FUNCTION
6 BLUETOOTH FUNCTION
7 CONNECTING AUXILIARY SOURCE
8 AUDIO CONTROLS
9 COLOR LIGHT
10 TECHNICAL SPECIFICATION
11 TROUBLE SHOOTING GUIDE
- 11.1 No Power
- 11.2 No Sound – General
12 Documents / Resources
- 12.1 References
- 12.2 Download manual

LOCATION OF CONTROLS

Please read the instruction carefully before operating the unit.

Main unit
Overview - Main unit - Part 1
Overview - Main unit - Part 2

Remote senser
Loud speakers
Tweeters
Passive membrane
Wooden feet
Handle
: To turn unit ON/OFF; to select function mode: Bluetooth, AUX
Function LED indicator (blue for Bluetooth; green for AUX; red for charging)
: Play/ pause/ Bluetooth pairing/ Stereo paring
: Decrease the volume
: Increase the volume
Light mode: White color mode/ single color mode/ dual color mode
To adjust the intensity of white color light; to select color light cycling mode
AUX IN jack (3.5MM)
DC IN jack 9.0V 2.5A
Magnetic fixing base
Tripod with solid wood feet and magnetic fixing base

Remote control
Overview - Remote control

R1. : To turn unit ON/ OFF
R2. : To select function mode: Bluetooth, AUX
R3. : Skip to previous track; skip to next track
R4. : Play/ pause
: Bluetooth pairing
R5. : To adjust the Treble level
R6. : To adjust the Bass level
R7. : To select color light cycling mode
R8. : Stereo pairing
R9. : Light mode: white color mode/ single color mode/ dual color mode
R10. : Volume down/ up
R11. To adjust the intensity of white color light

SETTING UP YOUR BLUETOOTH SPEAKER

STEP 1: Assemble the tripod with
STEP 2: Place the main unit onto the solid wood feet and magnetic fixing tripod properly. base.
STEP 3: Disassemble the cable ties
STEP 4: Strap the cable ties on the on the AC adaptor. wooden foot to fix the cord of AC adaptor.

POWER SUPPLY

Using the AC adaptor
The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V 50/60Hz and should only be connected to a mains supply within these parameters.

The AC adaptor included with this unit is for its use only. Do not use it with other equipment.
Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit being damaged.
When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet.
Be sure to use it near the wall outlet and easily accessible. If a malfunction occurs, disconnect the plug from the wall outlet at once.
AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a qualified service agent.

Using the Built- in battery
The unit has a built-in rechargeable battery (lithium-ion). Charge the built-in battery before using it for the first time. The charging indicator will light red and will be off after fully charge.

Recharge the built-in battery when you are ready to use it again.
While using the built-in battery, the environmental temperature should be 5°C (41°F) to 35°C (95°F).
To get the longest service life of the built-in battery, charge at indoor-temperature.
The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100°C (212°F), or incinerate.
The unit is supplied from limited power sources.
The unit is designed with a thermal protection system. When the unit's operation temperature exceeds 45°C, it will stop charging the built-in battery automatically for protection. In this case, await the unit to cool down to resume normal.
The unit should not be exposed to excessive heat such as sunshine, fire or the like.
When discarding the unit, environmental problems must be considered and local rules or laws governing the disposal of such products must be strictly followed.
When the built-in battery power is low, the function LED indicator will blink red.

Note: In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level and no control is operated on the device for a period of 15 minutes, the unit will automatically switch to Standby mode. But it will not switch to Standby mode automatically if lighting mode only.

TURNING UNIT ON/OFF

Press button to turn on the unit.
Press and hold button on unit or press button once on remote control to turn off the unit.

SELECTING FUNCTION

The function (BLUETOOTH/ AUX) is selected by pressing on unit or on remote control repeatedly.

BLUETOOTH FUNCTION

The Bluetooth^® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by New One S.A.S is under license. Other trademarks and trade names are those of their respective owners.

Pairing a Bluetooth Device

When the unit is ON, press on unit or on remote control repeatedly to select Bluetooth mode. The LED indicator will light blue then start to blink rapidly, indicating it is in pairing mode.
On the Bluetooth device, enable Bluetooth and select "MUSE ML-655BT" from the Device List.(Refer to the user manual of the device to be connected for detailed operations.) If the Bluetooth device prompts for a pass code, use"0000". Some Bluetooth devices will ask you to accept the connection. If the unit is paired properly, the LED indicator will light blue with an indication voice.

Tip: If you want to connect your Bluetooth speaker to another Bluetooth audio device, you need to disconnect current device first and follow the steps above to make a new connection.
If the pairing fails, perform the following:
Press and hold the button until the blue LED indicator blinks quickly to enter the Pairing mode. On the Bluetooth device, enable Bluetooth and select "MUSE ML655BT" from the Device List (see step 2 above).

On some devices such as computers, once paired you must select the unit from the Bluetooth menu and choose "Use as Audio Device (stereo)" or similar.
Pairing remains intact when the unit and/or your Bluetooth device is taken out of communication range. An active connection will be re-established when your Bluetooth device returns within range.
When the unit is turned on again, it will automatically try to reconnect with the most recently paired Bluetooth device.

Using a Bluetooth Device

With a unit paired (see previous section), operate your Bluetooth device and its sound will be heard through the ML-655 BT's speakers.
Press the button to pause playback. Press again to resume playback.
Select desired track by pressing on remote control or by the device which you are paired.
Adjust the volume by pressing the on unit or on remote control. You can also adjust the volume on the device to which you are paired.

STEREO PAIRING
This function makes it possible for you to get stereo surround sound quality. It requires two Bluetooth speakers ML-655 BT to realize the real Bluetooth radio channel wireless separation, therefore, you've got to purchase two ML-655 BT. Tips: It is suggested that the distance between the main speaker and secondary speaker is within 4 meters.
STEREO PAIRING

Strictly follow the steps below to ensure the stereo pairing function works properly.

Turn on the two Bluetooth speakers ML-655 BT. Press on unit or on remote control repeatedly to select Bluetooth mode for both speakers.
When both speakers are in pairing mode, press button twice on one Bluetooth speaker or press and hold button on remote control which will become the main speaker (left channel), then it will search and connect to the secondary speaker (right channel). They will recognize the left and right channel automatically. You will hear the indication voice "Left Channel" and "Right Channel" at the same time when the two speakers are connected successfully.
Connect your main speaker to Bluetooth enabled device (e.g. smart phone).
Play your song and listen to the sound in stereo.
Press button on either speaker to pause playback. Press again to resume playback.
Press button twice on either speaker or press and hold remote control to disconnect the stereo pairing. The unit will continue playback in main speaker.

Hereby, NEW ONE S.A.S, declares that this MUSE ML-655 BT is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.muse-europe.com

CONNECTING AUXILIARY SOURCE

Connect your auxiliary source (e.g. mp3 player) to the AUX IN jack on unit (cable included).
Press on unit or on remote control repeatedly to select AUX mode. The LED indicator will light green.
Start playback from your auxiliary source.
Adjust the volume to desired level.
To stop playback, disconnect your auxiliary source from the AUX IN jack.

AUDIO CONTROLS

When there is audio signal, press TREBLE or BASS button to adjust the treble or bass level as desired.

COLOR LIGHT

In standby mode, press button to turn on the light. Press button to change the light mode: white light single color light cycling dual color light cycling.

White light: there are 4 levels brightness light mode. Press the button to settle down the brightness.
Single color light cycling: it will achieve single color cycle effect. Press button on unit or press on remote control to settle down desired color light. Press the button again to resume color cycling. Press the button twice to change to next color quickly.
Dual color light cycling: it will achieve dual color cycle effect. Press button on unit or press on remote control to settle down desired multicolor ambience light. Press the button again to resume color cycling. Press the button twice to change to next multicolor quickly.

Press and hold the to turn off the light.

When the unit is on, press button repeatedly to change the light mode directly.
Press and hold the to turn off the light.

TECHNICAL SPECIFICATION

POWER SUPPLY:
AC adaptor:
Input AC 100-240V 50/60Hz 1.0A
Output DC 9.0V 2.5A 22.5W

RECHARGEABLE BATTERY
Battery Type: 7.4V 6600mAh Lithium Ion Battery
Operating Time: Approx. 3 hours at 100% volume after fully charged
Charging Time: Approx. 5 hours

BLUETOOTH
Bluetooth Version: V5.1
Bluetooth: 2.402-2.48GHz
RF Output Power: 0 dBm
Working Distance: Up to 10 meters measured in open space (wall and structures may affect range of device)

TROUBLE SHOOTING GUIDE

Should this unit exhibit a problem, check the following before seeking service:

No Power

Make sure unit is connected to AC power.
Make sure the battery is recharged.

No Sound – General

External device's volume is set to minimum; raise volume.
The ML-655 BT's volume is set to minimum; raise volume.

The Bluetooth device cannot pair or connect with the unit.

You have not activated the Bluetooth function of your device. Refer to the user manual of your device to activate Bluetooth function.
The unit is not in pairing mode. Press and hold the button until the Bluetooth indicator blinks fast.
The unit is already connected with another Bluetooth device; disconnect that device and then try again.

The use of apparatus in moderate climates.
The Marking plate is located at the back of the device.
Make sure to have a minimum distance of 5 cm around the unit for sufficient ventilation.
Ensure that the ventilation openings is not covered with items such as newspapers, tablecloths, curtains, etc.
Do not place naked flame sources, such as lighted candles on the apparatus.
Do not expose this appliance to dripping or splashing water.
Do not place objects filled with liquids, such as glass, vase on the device.
Do not throw batteries into fire! Respect the environment when disposing of used batteries.
Batteries should not be exposed to excessive heat such as sunshine, fire or other similar heat source.
AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To be completely disconnected the apparatus from supply mains, the AC adaptor of the apparatus shall be disconnected from the mains socket outlet completely.
Under the influence of fast transient and / or electrostatic electric phenomenon, the product may malfunction and the user must perform a power reset of the device.
The normal function of the product may be disturbed by strong Electro-Magnetic Interference. If so, simply reset the product to resume normal operation by following the instruction manual. In case the function could not resume, please use the product in other location.

If in the future, you need to get rid of this product, please note that Waste electrical products should not be disposed of with household waste. Recycling facilities exist. Check with your municipality or ask your dealer for advice. (Directive for Waste Electrical and Electronic Equipment)