Field-Replaceable Units In An Ex9200 Switch - Juniper EX9208 Hardware Manual

Figure 6: EX9208 Switch with DC Power Supplies
You can mount an EX9208 switch on a standard 19-in. four-post rack or a standard 800-mm enclosed
cabinet. You can mount up to six EX9208 switches in a standard (48 rack unit (U)) rack.
SEE ALSO
Installing and Removing EX9208 Switch Hardware Components

Field-Replaceable Units in an EX9200 Switch

Field-replaceable units (FRUs) are switch components that you can replace at your site. The EX9200
switch uses the following types of FRUs:
• Hot-insertable and hot-removable—You can remove and replace these components without powering
off the switch or disrupting the switching function.
• Hot-pluggable—You can remove and replace these components without powering off the switch, but
the switching function is interrupted until you replace the component.
Table 6 on page 24 lists the FRUs for the EX9200 switch and their types.
23