Cayman Systems 2E-H User Manual page 91

Cayman 2E-H User's Guide
November 2000
set system diagnostic-level level
Specifies the types of log messages you want the Cayman 2E-H to
record. All messages with a level number equal to or greater than the
level you specify are recorded. For example, if you specify set system
diagnostic-level 3, the diagnostic log will retain high-level
informational messages (level 3), warnings (level 4), and failure
messages (level 5).
Use the following values for the
or - Low-level informational messages or greater; includes
1 low
trivial status messages.
or - Medium-level informational messages or greater;
2 medium
includes status messages that can help monitor network traffic.
or - High-level informational messages or greater; includes
3 high
status messages that may be significant but do not constitute
errors.
or - Warnings or greater; includes recoverable error
4 warning
conditions and useful operator information.
or - Failures; includes messages describing error
5 failure
conditions that may not be recoverable.
set system password { admin | user }
Specifies the administrator or user password for a Cayman 2E-H.
When you enter the
prompted to enter the old password (if any) and new password. You
are prompted to repeat the new password to verify that you entered
it correctly the first time. To prevent anyone from observing the
password you enter, characters in the old and new passwords are not
displayed as you type them.
A password can be as many as eight alphanumeric characters.
Passwords are case-sensitive and cannot include special characters or
leading, trailing, or embedded spaces. For example, if you assign a
password of "GatoR" to a Cayman 2E-H, you could not enter
"GATOR", "gator", "Gator", or "GatoR " (with a trailing space) as an
acceptable password.
argument:
level
set system password
Using the Command Line Interface
command, you are
4-41