Connecting A Terminal To The Console Port - Cayman Systems 2E-H User Manual

Connecting a
Terminal to the
Console Port
Diagnostic Console
B-2
To connect your Cayman 2E-H to a terminal or terminal emulator:
1. Turn off the Cayman 2E-H.
2. Plug one end of the serial cable into the maintenance
console port on the Cayman 2E-H back panel.
3. Connect the other end of the serial cable to the serial port
on your terminal (or terminal emulator) or the modem
port of your computer.
4. Turn on the terminal or run the terminal emulator
program on your computer.
You should use the following settings to configure your terminal
emulation session:
Setting
Speed
Parity
Databits
Stopbits
Duplex
Set To
9600 bps
None
8
1
Full
Cayman 2E-H User's Guide
November 2000