System Settings - Cayman Systems 2E-H User Manual

System Settings

Using the Command Line Interface
4-40
The optional
community community-name
Cayman 2E-H community, which is included in the trap message the
device sends to the management console. This name, which is not
used for authentication, does not have to match a predefined
community name.
set snmp sysgroup contact contact_info
Identifies the system contact, such as the name, phone number,
beeper number, or email address of the person responsible for the
Cayman 2E-H. You can enter up to 256 characters for the
argument. You must put the
contact_info
in double-quotes if it contains embedded spaces.
set snmp sysgroup location location_info
Identifies the location, such as the building, floor, or room number,
of the Cayman 2E-H. You can enter up to 256 characters for the
argument. You must put the
location_info
argument in double-quotes if it contains embedded spaces.
You can configure system settings to assign a name to your Cayman
2E-H and to specify what types of messages you want the diagnostic
log to record.
set system name name
Specifies the name of your Cayman 2E-H. Each Cayman 2E-H is
assigned a name as part of its factory initialization. The default name
for a Cayman 2E-H consists of the word "Cayman-2E" and the serial
number of the device; for example, Cayman-2E810700. A device
name can be 1-16 characters long and cannot include spaces or
special characters. Once you have assigned a name to your Cayman
2E-H, you can enter that name in the Open Location text field of your
browser to open a connection to your Cayman 2E-H.
identifies the name of the
argument
contact_info
location_info
Cayman 2E-H User's Guide
November 2000