Cayman Systems 2E-H User Manual page 58

Using the Command Line Interface
4-8
or
5 failure –
conditions that may not be recoverable.
netstat -i
Displays the IP interfaces for your Cayman 2E-H.
netstat -r
Displays the IP routes stored in your Cayman 2E-H.
nslookup { hostname | ip_address }
Performs a domain name system lookup for a specified host.
The argument is the name of the host for which you
hostname
want DNS information; for example,
The
ip_address
notation, of the device for which you want DNS information.
]
ping [-s size [-c count
Causes the Cayman 2E-H to issue a series of ICMP Echo requests for
the device with the specified name or IP address.
The argument is the name of the device you want to
hostname
ping; for example,
The
ip_address
notation, of the device you want to locate. If a host using the
specified name or IP address is active, it returns one or more
ICMP Echo replies, confirming that it is accessible from your
network.
The argument lets you specify the size of the ICMP
-s size
packet.
The argument lets you specify the number of ICMP
-c count
packets generated for the ping request.
Failures; includes messages describing error
argument is the IP address, in dotted decimal
]
{ hostname | ip_address }
ping ftp.cayman.com
argument is the IP address, in dotted decimal
Cayman 2E-H User's Guide
.
nslookup klaatu
.
November 2000