Table of Contents
Advertisement
PPP
protocol
PSTN
repeater
RFC
RIP
RJ-45
route
routing table
RTS
serial communication
SLIP
static route
Glossary
8
Point-to-Point Protocol. Provides a method for transmitting
datagrams over serial router-to-router or host-to-network
connections using synchronous or asynchronous circuits.
Formal set of rules and conventions that specify how information
can be exchanged over a network.
Public Switched Telephone Network.
Device that regenerates and propagates electrical signals between
two network segments. Also known as a hub.
Request for Comment. Set of documents that specify the
conventions and standards for TCP/IP networking.
Routing Information Protocol. Protocol responsible for distributing
information about available routes and networks from one router to
another.
Eight-pin connector used for 10BaseT (twisted pair Ethernet)
networks.
Path through a network from one node to another. A large
internetwork can have several alternate routes from a source to a
destination.
Table stored in a router or other networking device that records
available routes and distances for remote network destinations.
Request to Send. Circuit activated in hardware flow control when a
computer (or other DTE) is ready to transmit data to a modem (or
other DCE). See CTS, xon/xoff.
Method of data transmission in which data bits are transmitted
sequentially over a communication channel.
Serial Line Internet Protocol. Predecessor to PPP that allows
communication over serial point-to-point connections running
TCP/IP. Defined in RFC 1055.
Route entered manually in a routing table.
Cayman 2E-H User's Guide
November 2000
Advertisement
Table of Contents
