Table of Contents
Advertisement
Cayman 2E-H User's Guide
November 2000
2. Connect the other end of the serial cable to the serial port
on your terminal (or terminal emulator) or the modem
port of your computer.
3. Turn on the terminal or run the terminal emulator
program on your computer.
Use the following settings to configure your terminal emulation
session:
Setting
Speed
Parity
Databits
Stopbits
Duplex
Flow Control
The console interface uses the same command line interface as the
Telnet interface.
Logging In
The command line interface log-in process emulates the log-in
process for a UNIX host. If your Cayman 2E-H has been assigned an
administrator password or user password, you must enter a
username (up to 32 characters) and your password.
Entering your username lets the Cayman 2E-H record your
access; your username is not used to validate your authorization.
Entering the administrator password lets you display and update
all Cayman 2E-H settings.
Entering a user password lets you display (but not update)
Cayman 2E-H settings.
Set To
9600 bps
None
8
1
Full
None
Using the Command Line Interface
4-3
Advertisement
Table of Contents
