Cayman Systems 2E-H User Manual page 86

Using the Command Line Interface
4-36
local peer will have blank name values. This may cause
authentication to fail for some PPP implementations.
set PPP module port-authentication chap-name chap_name
Specifies the name the Cayman 2E-H sends in a CHAP response
packet. The
chap_name
The information you enter must match the CHAP username
configured in the remote PPP peer's authentication database.
set PPP module port-authentication chap-secret secret
Specifies the CHAP secret for CHAP authentication. The
argument is 1-32 alphanumeric characters. The information you
enter must match the CHAP secret used by the PPP peer.
set PPP module port-authentication pap-option { on | off }
Specifies whether PAP authentication is enabled for a port. By
default, PAP authentication is turned off. PAP authentication must be
enabled before you can enter other PAP information. If you disable
PAP authentication and save the modified configuration, your
Cayman 2E-H retains its PAP settings.
set PPP module port-authentication pap-name pap_name
Specifies the name the Cayman 2E-H sends in a PAP response packet.
The argument is 1- 32 alphanumeric characters. The
pap_name
information you enter must match the PAP username configured in
the PPP peer's authentication database.
set PPP module port-authentication pap-password password
Specifies the password the Cayman 2E-H sends when a PPP peer
sends a PAP authentication request. The
alphanumeric characters. The information you enter must match the
PAP password used by the PPP peer.
argument is 1-32 alphanumeric characters.
password
Cayman 2E-H User's Guide
secret
argument is 1-32
November 2000