Administration Commands - Cayman Systems 2E-H User Manual

Administration
Commands
Cayman 2E-H User's Guide
November 2000
help [command] or command ?
The help command displays a summary of the available commands.
The help command displays the syntax and function of the
command you specify.
To access an overview of the diagnostic console commands, type
help or ? at the console prompt. To access on-line help for a specific
command, type help
prompt. For example, the console command file ? returns the
following:
BootPROM> file ?
usage: file <file-name>
specifies the file to be retrieved from a server.
Filenames containing whitespace may be enclosed in
double quotes (``). Also, whitespace may be quoted with
a ^ character, and special characters may be entered in
hex, following a leading ^x sequence.
The following commands configure the Cayman 2E-H restart
settings.
boot [{ flash | tftp | bootp }] [nogo]
If you do not enter an argument, the boot command causes the
Cayman 2E-H to behave as if it had been powered up with autoboot
enabled. That is, it will try to download its image from flash, TFTP,
and BOOTP (if enabled) in that order.
If you enter a flash, tftp, or bootp argument for the boot
command, the Cayman 2E-H attempts to download its image from
the specified download source.
If you include the optional nogo argument for a boot command,
control is not transferred to the image after it is loaded.
or command ? at the console
command
Diagnostic Console
B-5