Cayman Systems 2E-H User Manual page 52

Using the Command Line Interface
4-2
telnet ip_address
You must know the IP address of the Cayman 2E-H before you can
make a Telnet connection to it. By default, your Cayman 2E-H uses
192.168.1.254 as the IP address for its LAN interface. You can use a
Web browser or the maintenance console to configure the Cayman
2E-H IP address.
Connecting from the Maintenance Console Port
You can connect a terminal or terminal emulator to the maintenance
console port on the Cayman 2E-H to configure, administer, and
monitor your Cayman 2E-H.
To use the Cayman 2E-H console, you need a serial cable and either
a terminal or terminal emulator (such as a personal computer with a
terminal emulation application that supports 9600-baud
communication).
To connect your Cayman 2E-H to a terminal or terminal emulator:
1. Plug the DB-9 end of a serial cable into the maintenance
console port on the Cayman 2E-H back panel.
Figure 4-1. Connecting Your Cayman 2E-H to a Terminal
Cayman 2E-H User's Guide
November 2000