Configuring Non-Broadcast Ssid Networks - GE Healthcare Optima XR200amx Installation Manual

GE H
EALTHCARE
D 5336113-1EN, R
IRECTION
Table 4-7
Authentication type
WPA TM -Enterprise (EAP)
WPA2 TM -Personal (PSK)
WPA2 TM -Enterprise (EAP)
WPA2 TM -Enterprise (EAP)
6.
7.
8.

4.2.6.3 Configuring non-broadcast SSID networks

1.
2.
3.
4.
Page 62
10
EVISION
• Encryption (if different than TKIP)
• Identity
• Password
• Client certificate
• Inner Auth
• Private key file
• Private key password
• PEAP version (only if EAP method is set to PEAP)
• Encryption (if different than TKIP)
• PSK
• Encryption (if different than CCMP)
• Identity
• Password
• Client certificate
• Inner Auth
• Private key file
• Private key password
• PEAP version (only if EAP method is set to PEAP)
• EAP-TLS
Click ADD.
Select the Current Status tab, and click CONNECT. Verify successful connection message.
To verify connectivity:
a. Select FILE menu > TOOLS.
b. Enter the IP of the machine you want to ping.
c. Press START PING and check for messages verifying connectivity.
d. Press STOP PING.
On the Wireless configuration screen, select NETWORK menu > ADD.
Select IP settings:
- If the system will be identified on the network by a static IP address, select STATIC IP,
and enter the IP address, netmask, and gateway. If no gateway is used, you must enter
0.0.0.0.
- If the system will be identified on the network using DHCP, select DHCP.
Enter the network SSID.
Choose the authentication type.
Section 4.2 Using the System Configuration Tool (SUIF)
Required fields
O XR200 /XR220
PTIMA AMX
I M
NSTALLATION ANUAL
No FIPS FIPS ON
Y N
Y Y
Y N
N Y
AMX