Write-Protect Of Sd Card Message; Data Protection Message; No Patient Cable Message - EDAN SE-2003 User Manual

SE-2003&SE-2012 Holter System Recorder User Manual

4.4.6 Write-protect of SD Card Message

The prompt message below will show up if write-protect switch is detected to be at Lock position
and item of data protect under Advanced setting is set to on. The recorder will shut off in 60
seconds.

4.4.7 Data Protection Message

If the Data Protection is set to ON in the advanced settings and there is unanalyzed data in the
SD card, the recorder will show the message:
NOTE: To proceed running, data in the SD card has to be analyzed at least once or be
canceled on PC.

4.4.8 No Patient Cable Message

The prompt message below will show up if no patient cable is detected before recording. The
recorder will wait until patient cable is inserted.
WARNING!!!
SD card is locked.
ECG can't be recorded.
WARNING!!!
ECG file isn't analyzed
Power off in 5 minutes.
No patient cable.
Please insert.
- 27 -