Dry Work" Mode Selection - EMS PIEZON MASTER 700 Operation Instructions Manual

"Dry Work" mode selection

Press the foot pedal on the corresponding symbol to activate the "Dry work" mode.
Never work dry to avoid heat damage on the tissues unless the instrument is intended specifically
for this purpose. The tip of the instrument immediately heats up when used without irrigation.
Please refer to the operating instructions of the Piezon systems for further information concerning
instruments usable in "Dry work" mode.
24
FB-430_CN_rev_C_PIEZON MASTER 700.indd 24-25 FB-430_CN_rev_C_PIEZON MASTER 700.indd 24-25
"无水工作" 模式选择
按下对应符号上的脚踏开关可激活"无水工作"模式。
绝不要进行无水工作，以免对牙齿造成热损伤，除非探针专门用于此目的。 无喷水情况下使用时，
探针的工作尖的温度很快就会升高。
有关可在"无水工作"模式下使用的探针的更多信息，请参阅 Piezon 系统的使用说明书。
25
4/7/2020 9:55:35 AM 4/7/2020 9:55:35 AM