Discharge Lamp - Sharp AR-280 Service Manual

* When replacing the charger wire:
•
Be careful not to twist or bend the wire.
•
Stretch the wire so that the tension spring length is as shown
above.
•
Securely put the charger wire in the groove.

4. Discharge lamp

A. Discharge lamp
1)
3)
2)
10 0.5mm
4)
5. Scanner unit (Optical system)
A. Table glass
* Table glass installing direction
•
Install the table glass so that the white marking on the glass is
in the paper feed direction rear side.
B. White reference glass (SPF scan glass)
1)
2)
3)
* The shape of the glass holder differs depending on the model.
Guide
White paint section
* Attach the glass along the guide so that the white pain section of
the white reference glass faces downward as shown above.
* When handling the white reference glass, be careful not to scratch
the white pain section and keep it from dirt or dust.
10 – 4
AR-335
1)
3)
1)
Upper side
Paper exit
side
1/21/1999
2)