Sharp AR-280 Service Manual page 87

AR-405
Note
26 - 30 Purpose Setting
Function Used to set the CE mark conforming operation mode. (For flickers when driving the fusing heater lamp.)
(Purpose)
Section
Item Specifications
Operation/ Enter the number corresponding to the operation mode with the 10-key and press the [OK] key.
Procedure
Set value
0 : Normal operation heater lamp slow up control
1 : CE mark standard complying operation (Heater lamp slow up control) (Europe)
Note
26 - 35 Purpose Setting
Function Used to set whether the trouble history display of SIM 22-4 is displayed as one trouble or as the number of
(Purpose) continuous troubles when two or more troubles of a same kind occured.
Section
Item Specifications
Operation/ Used to set whether the trouble history display by SIM 22-4 is displayed as one trouble or as the accumulated
Procedure number of continuous troubles when two or more troubles of same kind occur continuously.
Select the number corresponding to the display mode with the 10-key and press the [OK] key.
1 : The trouble history display by SIM 22-4 is displayed as it is when two or more troubles occur continuously.
0 : The trouble history display by SIM 22-4 is displayed as one trouble when two or more troubles occur continuously.
Default: 0
Note
1/21/1999
Content
0 CE mark control inhibit
1 CE mark control allowed (Default)
Operation mode (Common)
8 – 42