1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Copier
  5. AR-206
  6. Operation manual

Sharp AR-206 Operation Manual

Digital laser copier
Hide thumbs Also See for AR-206:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
MODEL
AR-206
DIGITAL LASER COPIER
OPERATION MANUAL
• GETTING STARTED
• MAKING COPIES
• STATUS INDICATORS
• GENERAL INFORMATION
• OPTIONAL EQUIPMENT
Page
2
13
28
36
55

Advertisement

Table of Contents
loading

Related Manuals for Sharp AR-206

Summary of Contents for Sharp AR-206

  • Page 1 MODEL AR-206 DIGITAL LASER COPIER OPERATION MANUAL Page • GETTING STARTED • MAKING COPIES • STATUS INDICATORS • GENERAL INFORMATION • OPTIONAL EQUIPMENT...
  • Page 2 CAUTIONS Follow the cautions below when using this copier. The fusing area is hot. Exercise care in this area when removing misfed paper. Do not look directly at the light source. Doing so may damage your eyes. Place the copier on a firm, level surface. Do not install the copier in a humid or dusty location.

  • Page 3: Table Of Contents

    CONTENTS Page GETTING STARTED INTRODUCTION ....... . . 2 MAIN FEATURES ....... . 3 PART NAMES AND FUNCTIONS .

  • Page 4: Introduction

    INTRODUCTION This copier has been designed to provide convenient copying features in a minimum amount of office space and with maximum operational ease. To get full use of all copier features, be sure to familiarise yourself with this manual and the copier. For quick reference during copier use, keep this manual in a handy location.

  • Page 5: Main Features

    Paper output tray is housed in the copier for space saving. Preheat and auto power shut-off modes are provided to reduce power consumption in standby mode and meet the Energy Star Guidelines. As an NERGY ® Partner, SHARP has determined that this product meets NERGY ® guidelines for energy efficiency.

  • Page 6: Part Names And Functions

    PART NAMES AND FUNCTIONS Overall layout Platen cover (optional) Paper trays Place the original on the original table and close the Each tray holds 250 sheets of copy paper. platen cover before copying starts. Side cover Original table Open to remove misfeeds and to service the copier. Place the document to be copied here.
  • Page 7 PART NAMES AND FUNCTIONS Paper guide Toner cartridge lock release lever Open to remove misfed paper. Use to unlock the toner cartridge. Toner cartridge Accessories Contains toner. Operation manual ..... . 1 Photoconductive drum Charger cleaner .

  • Page 8: Operation Panel

    PART NAMES AND FUNCTIONS Operation panel Not used for the copier features. INTERRUPT key and indicator (p. 26) B/W REVERSE key and indicator (p. 24) Interrupts a copy run. Press to reverse the black and white areas. Copy quantity display XY-ZOOM key and indicator (p.
  • Page 9 PART NAMES AND FUNCTIONS The general location of misfed paper is shown by a 1st display 2nd display blinking red indicator ( DUAL PAGE COPY key and indicator (p. 25) Use to make individual copies of two originals placed 12,345 side by side on the original table.

  • Page 10: Copier Installation

    COPIER INSTALLATION Improper installation may damage the copier. Please note the following during initial installation and whenever the copier is moved. If the copier is moved from a cool place to a warm place, condensation may form inside the copier. Operation in this condition will cause poor copy quality and malfunctions.

  • Page 11: Cautions On Handling

    CAUTIONS ON HANDLING Be careful in handling the copier as follows to maintain the performance of this copier. Do not drop the copier, subject it to shock or strike it against any object. Store spare toner cartridges in a cool dry place without removing from the package before use.

  • Page 12: Loading Copy Paper

    To save space, this copier has been designed with adjustable front-loading trays, which are easily opened for paper loading. For best results, use only SHARP recommended paper. (See page 50.) The paper required ( ) indicator will light up when there is no copy paper in the selected paper feed station, or when the selected paper tray is not installed or is improperly installed.

  • Page 13: Changing The Copy Paper Size In The Tray

    LOADING COPY PAPER Changing the copy paper size in the tray Gently lift and pull out the paper tray until it stops. Push the pressure plate down until it locks in place. Squeeze the lock lever of the front guide and slide the front guide to match the width of the paper.
  • Page 14 LOADING COPY PAPER To set the selected paper size, press the PAPER SIZE ENTER key. The selected paper feed location indicator will blink and the corresponding paper size (which is currently set) indicator will light up steadily. All other indicators will go out. For paper size setting, ensure that the COPY mode has been selected.

  • Page 15: Auditing Accounts

    AUDITING ACCOUNTS If this copier has been programmed in the auditing mode, it will not function until an assigned 3-digit account number has been entered. See page 39 for setting the auditing mode. If the copier has been programmed in the auditing mode, “–––” will appear in the copy quantity display in the initial conditions.

  • Page 16: Normal Copying

    NORMAL COPYING Turn the power switch on. It will take about 35 seconds for the copier to warm up. However, you Power on can make desired settings and press the START key during warm-up. Copying will start after warm-up. If the copier has been programmed in the auditing mode, the START key indicator will not light up and “–––...
  • Page 17 NORMAL COPYING For manual copy density adjustment, press the AUTO/MANUAL/ PHOTO key to select MANUAL and adjust with the light ( ) and dark ( ) keys as desired. For photographs, select PHOTO and then adjust with the light ( and dark ( ) keys as desired.

  • Page 18: Reduction/Enlargement/Zoom

    REDUCTION/ENLARGEMENT/ZOOM Reduction and enlargement ratios can be selected either automatically with the AUTO IMAGE key or manually with the PRESET RATIO selector ( ) keys and/or the zoom ( ) keys. The zoom function enables precise copy ratio selection from 50% to 200% in 1% increments. Automatic Place the original on the original table and close the platen cover.
  • Page 19 REDUCTION/ENLARGEMENT/ZOOM Manual Place the original on the original table and close the platen cover. Use the PRESET RATIO selector ( ) keys and the zoom ( ) keys to select the desired copy ratio. To select a preset reduction or enlargement copy ratio, press the key repeatedly until the indicator for the desired copy ratio is lit.

  • Page 20: Bypass Feed (Special Paper)

    BYPASS FEED (special paper) The bypass tray is used to copy onto transparency film, labels, and other special purpose papers. Up to 100 sheets of standard copy paper can be set in the bypass tray. For special purpose papers, the original image must be smaller than the paper or media for copying.
  • Page 21 BYPASS FEED (special paper) Press the TRAY SELECT key to select the bypass tray. Leave the copy quantity at 0 if using special papers. Set the number of copies if using standard copy paper or envelopes. Press the START key.

  • Page 22: Two-Sided Copying

    TWO-SIDED COPYING Automatic two-sided copying can be performed with this model. If an optional single pass feeder (SPF) or reversing single pass feeder (RSPF) is installed, two-sided copies can be automatically made from one-sided originals ( ). With the optional reversing single pass feeder (RSPF) installed, then two-sided copies can be made from two-sided originals ), and also two single-sided copies can be made from one two-sided original (...
  • Page 23 TWO-SIDED COPYING Place the second original face down on the original table and press the START key again to copy onto the other side. To stop a copy run during duplex copying, press the CLEAR key. If an uneven number of originals are set, press the ORIGINAL TO COPY key at the end of the copy run to output the last copy.

  • Page 24: Xy Zoom

    XY ZOOM The XY ZOOM feature allows the horizontal and vertical copy ratios to be Original Copy changed independently. This feature cannot be used with the 2 in 1 or 4 in 1 feature. (The 2 in 1 or 4 in 1 feature can only be used when an optional electronic sorting kit and an optional SPF or RSPF are installed.) To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and then the XY ZOOM feature.
  • Page 25 XY ZOOM Use the PRESET RATIO selector ( ) keys and zoom ) keys to change the copy ratio in the horizontal direction in a similar manner as for the vertical direction. Press the copy ratio display ( ) key. The selected ratio for the horizontal direction will be entered and the display will change to the copy quantity display.

  • Page 26: B/W Reverse

    B/W REVERSE Original Copy The B/W REVERSE feature is used to reverse black and white areas. When the B/W REVERSE feature is selected, the exposure mode will be automatically set to the MANUAL mode. Other exposure modes cannot be selected. Even if this feature is cancelled, the MANUAL mode will not auto- matically be cancelled.

  • Page 27: Dual Page Copy

    DUAL PAGE COPY Original Copy The DUAL PAGE COPY feature produces individual copies of two documents placed side by side on the original table. It is especially useful when copying books and other bound documents. This feature cannot be used with the 2 in 1 or 4 in 1 feature and sort/group feature.

  • Page 28: Interrupting A Copy Run

    INTERRUPTING A COPY RUN INTERRUPT is used to interrupt a long copy run so that another job can be done. SORT or GROUP cannot be selected during interrupt copying. (Sort and group can be performed only if an optional electronic sortring kit and an optional SPF or RSPF are installed.) INTERRUPT will not function during two-sided copying.

  • Page 29: Automatic Exposure Adjustment

    AUTOMATIC EXPOSURE ADJUSTMENT The automatic exposure level can be adjusted to suit your copying needs. This level is set for copying from the original table and copying from the optional SPF or RSPF respectively. To set the level for the optional SPF or RSPF, place an original in the document feeder tray and make sure that the SPF indicator lights up before proceeding to step 1.

  • Page 30: Toner Cartridge Replacement

    SHARP products. cartridge. When the toner cartridge replacement required ( ) indicator The package of SHARP toner has the Genuine blinks, the toner cartridge must be replaced before copying can be resumed. Supplies label. Replace the toner cartridge by following the procedure below.

  • Page 31: Toner Cartridge Life

    TONER CARTRIDGE REPLACEMENT Gently insert the toner cartridge along the guides until it locks in place while pushing the lock release lever. If dirt or dust is adhered to the toner cartridge, remove it before installing the cartridge. Remove the tape from the shutter. Pull the shutter out of the toner cartridge as shown in the illustration.

  • Page 32: Misfeed Removal

    MISFEED REMOVAL The copier will stop when a misfeed occurs. The misfeed If paper is accidentally torn during removal, be sure to ) indicator will blink, and blinking red misfeed location remove all pieces. indicators will indicate the approximate misfeed location. Be careful not to damage the photoconductive drum.
  • Page 33 MISFEED REMOVAL Check the misfeed location. Remove the misfed paper following the instructions for each location in the illustration below. If paper is misfed here, proceed to “B. Misfeed in the fusing area”. If the misfed paper is seen from this side, proceed to “C.
  • Page 34 MISFEED REMOVAL Turn the roller rotating knob in the direction of the Roller rotating knob arrow. Carefully remove the misfed paper. Lower the fusing unit release levers to allow easier removal. Return the release levers to their operating positions. Fusing unit release lever The fusing unit is hot.

  • Page 35: Misfeed In The Upper Paper Tray

    MISFEED REMOVAL Close the side cover by pressing the handle on the cover. The misfeed ( ) indicator will go out. Misfeed in the upper paper tray Before opening the upper paper tray, be sure to open the bypass tray, lift slightly on the side cover and slide the cover out until it stops, and then perform steps 1 to 3 described in the “A.

  • Page 36: Misfeed In The Lower Paper Tray

    MISFEED REMOVAL Misfeed in the lower paper tray Grasp the handle of the lower side cover and gently open the cover. Remove the misfed paper. Be careful not to tear the misfed paper during removal. If the misfed paper is not seen in step 2, gently lift and pull out the lower paper tray and remove the misfed paper.

  • Page 37: Developer Required

    DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN AUTHORISED SHARP SERVICE TECHNICIAN. Contact your service centre as soon as possible. MAINTENANCE REQUIRED When the indicator lights up, service by an authorised SHARP service technician is required. Contact your service centre as soon as possible.

  • Page 38: User Programs

    USER PROGRAMS The user programs allow the parameters of certain functions to be set, changed, or cancelled as desired. List of user programs This copier has the following user programs. Program No. Program name Description Auto clear time Sets the auto clear time. The copier returns to the initial settings when the auto clear time elapses after the last copy is made.

  • Page 39: Setting The User Programs

    USER PROGRAMS Setting the user programs Press and hold the light ( ) key for more than 5 seconds until all the alarm indicators ( ) blink and “– –” appears in the copy quantity display. Enter a program number using the numeric keys. The selected program number will blink in the copy quantity display.
  • Page 40 USER PROGRAMS Select the desired parameter using the numeric keys. The entered parameter number will blink on the right side of the copy quantity display. The parameters are shown in the table below. For example, to change the setting of the auto power shut-off timer to 60 min., press key 2.

  • Page 41: Settings For Auditing Accounts

    USER PROGRAMS Settings for auditing accounts Setting of user programs No. 10 to 15 varies with the program number. For settings of all programs, first follow steps 1 to 3 in “Setting the user programs” on page 37 to select a program. (1. Press the light ( ) key for more than 5 seconds.
  • Page 42 USER PROGRAMS Program No. 12: Account number change Program No. 12 is used to change account numbers. When program No. 12 is entered, an account number will appear in the copy quantity display. If no account number has been registered, “12E” will appear in the copy quantity display.
  • Page 43 USER PROGRAMS Program No. 14: Number of copies per account Program No. 14 is used to display the total number of copies made against each account number. When program No. 14 is entered, an account number will appear in the copy quantity display. If no account number has been registered, “14E”...
  • Page 44 USER PROGRAMS Program No. 15: Resetting account Program No. 15 is used to reset all accounts or to reset any desired individual account. When program No. 15 is entered, “0” will blink on the right side of the copy quantity display. If no account number has been registered, “15E”...

  • Page 45: Power Save Modes

    The auto power shut-off mode saves more power but requires a longer time to warm up before copying can begin. As an NERGY ® Partner, SHARP has determined that this product meets the NERGY ® guidelines for energy efficiency.
  • Page 46 POWER SAVE MODES Setting the power save modes The time that elapses before the copier enters a power save mode after any operation is made can be set manually. This time is set with user program No. 2 for the preheat mode and user program No. 3 for the auto power shut-off mode.

  • Page 47: User Maintenance

    USER MAINTENANCE Proper care is essential for clean, sharp copies. Please take a few minutes to regularly clean your copier. Original table and platen cover Stains or dirt on the original table or platen cover will also be copied. Wipe the original table and platen cover with a soft, clean cloth.
  • Page 48 USER MAINTENANCE Transfer charger cleaning If copies start becoming streaky or blotchy, the transfer charger may be dirty. Clean the charger using the following procedure. Turn the power switch off. Open the bypass tray. Lift slightly on the side cover and slide the cover out until it stops.

  • Page 49: Copier Trouble

    COPIER TROUBLE? Problem Solution Copier plugged in? Plug the copier into a grounded outlet. See page 8. Copier does not operate. Power switch ON? Turn the power switch ON. See page 14. Copy density properly adjusted? See pages 14 and 27. Copies are too dark or too light.
  • Page 50 Use a clean original. Copies are smudged or dirty. Is the indicator on? Developer is required. Contact your SHARP service centre as soon as possible. See page 35. Is the indicator on? Maintenance is required. Contact your SHARP service centre as soon as possible. See page 35.
  • Page 51 Be sure to use only genuine SHARP parts and supplies. Please contact your SHARP service centre immediately if a problem persists after checking the above. Self-diagnostic function An automatic self-diagnostic function is built into the copier.

  • Page 52: Supplies

    These will cause physical damage to the copier. For best results, use only paper recommended by SHARP. Special papers except envelopes must be fed one sheet at a time through the bypass tray. Up to 10 envelopes can be set at one time.

  • Page 53: Genuine Supplies Statement

    For best copying results, be sure to use only Standard supplies for this copier that are to be replaced by the user are copy SHARP products. paper and toner cartridge. Only genuine SHARP consumables carry the Genuine Supplies label. GENUINE SUPPLIES Proper storage...

  • Page 54: Specifications

    SPECIFICATIONS Type Digital laser copier, desktop Copy system Dry, electrostatic transfer Originals Sheets, bound documents Original sizes Max. A3 Copy sizes Max. A3 Min. A6 Image loss: Max. 4 mm (leading and trailing edges) Max. 4 mm (along other edges in total) Copying speed 20 copies/min.
  • Page 55 First-copy time may differ depending on operating conditions, such as power-supply voltage and room temperature. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.
  • Page 56 MEMO...

  • Page 57: Optional Equipment

    OPTIONAL EQUIPMENT CONTENTS Page SYSTEM CONFIGURATION ......56 SINGLE PASS FEEDER (AR-SP2)/ REVERSING SINGLE PASS FEEDER (AR-RP1) ... 57 Part names .

  • Page 58: System Configuration

    SYSTEM CONFIGURATION A number of options are available for the copier which allow you to configure a copier system to meet your particular needs. The options include the following. Single pass feeder Reversing single pass feeder (AR-SP2) (AR-RP1) Platen cover (AR-VR1) Electronic sorting kit (AR-EB3) Facsimile expansion kit (AR-FX2)* Printer expansion kit (AR-PB8)*...

  • Page 59: Single Pass Feeder (Ar-Sp2)/ Reversing Single Pass Feeder (Ar-Rp1)

    Dimensions 583 mm (W) x 435 mm (D) x 131 mm (H) As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 60: G Using The Spf Or The Rspf

    SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1) Using the SPF or RSPF Be sure to remove any staples or paper clips from the Special originals such as transparency film and tracing originals. paper should not be fed through the SPF or RSPF but Damaged or crumpled originals may misfeed in the SPF should be copied from the original table.
  • Page 61 SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1) Set the number of copies and press the START key. Press the CLEAR key to stop copying in the middle of a run. Two-sided copies from one-sided originals Ensure that no original is left on the original table. Adjust the original guides to the size of the originals and set the originals face up in the document feeder tray.
  • Page 62 SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1) Press the START ( ) key. For two-sided copying, a multiple number of copies can only be set if an optional electronic sorting kit is installed. Two-sided copies from two-sided originals To copy in the two-sided to two-sided copy mode, an optional RSPF must be installed.
  • Page 63 SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1) Press the START key. For two-sided copying, a multiple number of copies can only be set if an optional electronic sorting kit is installed. Be sure not to touch the originals as they move on the reversing tray. This may cause misfeeds.

  • Page 64: Setting Image Rotation In Duplex Copying

    SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1) Setting image rotation in duplex copying Press and hold down the ORIGINAL TO COPY key for approximately 5 seconds until the indicator will blink and the currently selected parameter number will blink in the copy quantity display.

  • Page 65: Misfeed Removal

    SINGLE PASS FEEDER ( AR-SP2 )/REVERSING SINGLE PASS FEEDER (AR-RP1) Misfeed removal If an original misfeed occurs in the SPF or RSPF, the copier will stop and the red indicator which indicates an original misfeed will blink. Location A Open the feeding roller cover and pull the original gently Feeding roller cover to the left and out from the document feeder tray.

  • Page 66: Electronic Sorting Kit (Ar-Eb3)

    The memory can be expanded by adding commercially available memories recommended by SHARP. For details, contact your dealer. To use the 2 in 1 or 4 in 1 and sort/group functions, an optional SPF or RSPF is needed.

  • Page 67: Sort/Group

    ELECTRONIC SORTING KIT (AR-EB3) Sort/group If an optional electronic sorting kit is installed, the copier will have two sorter modes for different copying jobs: one sorts copies into sets matching the sequence of the originals and the second groups copies by originals. The sort/group feature cannot be used with the dual page copy feature.

  • Page 68: Copying In The Sort Mode

    ELECTRONIC SORTING KIT (AR-EB3) Copying in the sort mode When copying in the sort mode, the original image will be stored in the copier memory each time an original is scanned and copying will start after all originals have been scanned. To copy in the sort mode, an optional SPF or RSPF is needed.

  • Page 69: In 1 Or 4 In 1

    ELECTRONIC SORTING KIT (AR-EB3) 2 in 1 or 4 in 1 The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a 2 in 1 copying specified order, onto one sheet. To use these features, an optional SPF or RSPF is needed.
  • Page 70 ELECTRONIC SORTING KIT (AR-EB3) Enter the desired pattern number using a numeric key. The entered number will blink in the copy quantity display. For layout pattern numbers, see the previous page. Press the START key. The entered number will light up steadily. Press the 2 IN 1 / 4 IN 1 key to complete the selection.

  • Page 71: Erase

    ELECTRONIC SORTING KIT (AR-EB3) Erase This copier has an edge erase mode and a centre erase mode. Edge erase Edge erase can be used to eliminate shadow lines around the edges of copies caused when thick paper or a book is used as an original. Centre erase can be used to eliminate the shadow produced by the bindings of bound documents.
  • Page 72 ELECTRONIC SORTING KIT (AR-EB3) Set the number of copies. Press the START key.

  • Page 73: Margin Shift

    ELECTRONIC SORTING KIT (AR-EB3) Margin shift The MARGIN SHIFT feature automatically shifts the text or image to Original Copy increase the margin for binding by approximately 9 mm. The location of the margin to be increased can be selected to be either at the left edge or the top of the page.

  • Page 74: 250-Sheet Paper Feed Unit (Ar-De5) 2X250-Sheet Paper Feed Unit (Ar-De6)

    250-SHEET PAPER FEED UNIT (AR-DE5) 2x250-SHEET PAPER FEED UNIT (AR-DE6) These paper feed units as options provide the convenience of increased paper capacity for the copier and a greater choice of paper sizes readily available for copying. The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains two 250-sheet paper trays.
  • Page 75 250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6) Misfeed removal The copier will stop when a misfeed occurs. The misfeed ( ) indicator and the red indicator which indicates the paper feed unit will blink. Open the side cover of the paper feed unit and remove the misfed paper.
  • Page 76 590 mm (W) x 471 mm (D) x 173.5 mm (H) Power supply Drawn from the copier As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units.

  • Page 77: Index

    INDEX 250-sheet paper feed unit ..... . . 72 Initial settings ....... . . 7 2 in 1 .
  • Page 78 INDEX Reduction ........16 Replacement – toner cartridge ......28 Reversing single pass feeder (RSPF) .

  • Page 79: Material Safety Data Sheet

    (Name and Telephone Number) U.S.A. Sharp Electronics Corporation Telephone number for information: 1-800-237-4277 Emergency telephone number: 1-800-255-3924 Canada Sharp Electronics of Canada Ltd. Telephone number for information: 905-890-2100 Emergency telephone number: 1-800-255-3924 United Kingdom Sharp Electronics (U.K.) Ltd. Telephone number for information: 01923-474013 Section 3.
  • Page 80 Section 6. Physical Chemical Characteristics Boiling / Melting Point: Not applicable Specific Gravity: Vapor Pressure: Not applicable Solubility in Water: Negligible Vapor Density: Not applicable Not applicable Evaporation Rate: Not applicable Viscosity: Not applicable Appearance: Fine powder Color: Black Odor: Odorless Section 7.
  • Page 81 (Name and Telephone Number) U.S.A. Sharp Electronics Corporation Telephone number for information: 1-800-237-4277 Emergency telephone number: 1-800-255-3924 Canada Sharp Electronics of Canada Ltd. Telephone number for information: 905-890-2100 Emergency telephone number: 1-800-255-3924 United Kingdom Sharp Electronics (U.K.) Ltd. Telephone number for information: 01923-474013 Section 3.
  • Page 82 Section 6. Physical Chemical Characteristics Boiling / Melting Point: Not applicable Specific Gravity: about 7.3 Vapor Pressure: Not applicable Solubility in Water: Negligible Vapor Density: Not applicable Not applicable Evaporation Rate: Not applicable Viscosity: Not applicable Appearance: Fine powder Color: Black Odor: Odorless...
  • Page 83 MEMO...
  • Page 84 MEMO...
  • Page 85 MEMO...
  • Page 86 Warning! This product is a class A product. If it is operated in households, offices or similar surroundings, it can produce radio interferences at other appliances, so that the user has to take adequate countermeasures. VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN...
  • Page 87 In some areas, the “POWER” switch positions are marked “I” and “ ” on the copier instead of “ON” and “OFF”. The symbol “ ” denotes the copier is not completely de-energized but in a stand-by condition at this “POWER” switch position. If your copier is so marked, please read “I”...
  • Page 88 AR-206 SHARP ELECTRONICS (U.K.) LTD. Sharp House, Thorp Road, Newton Heath, Manchester M40 5BE SHARP CORPORATION PRINTED IN CHINA 2000M TINSE0457QSZZ...

Table of Contents