Sharp AR-280 Service Manual page 54

3
3 - 2 Purpose Operation test/check
Function Used to check the operation of sensors and detectors in the sorter and the related circuit.
(Purpose)
Section Sorter/Finisher
Item Operation
Operation/ The display differs depending on the unit (sorter, finisher) installed.
Procedure The operations of the sensors and detectors in the sorter and the finisher section are displayed.
The active sensors and detectors are highlighted.
In the case of AR-SS1
PIS
PSFT
THLS
TLLS
THPS
PSFT0
SPHPS
In the case of AR-FN1
JGHP
READY
PSHP
STUHP
T2PF
STND
EVRE
OFHP
STHP
INPD
RVPD
PGOP
PFD1
PFD2
Note
Paper entry port sensor
Paper empty sensor
Upper limit sensor
Lower limit sensor
Bin home sensor
Take-out position sensor
Alignment rod home sensor
Jogger motor home sensor
Stapler self priming sensor
Pusher motor home sensor
Staple unit home sensor
Tray 2 paper full sensor
Stapler replacement sensor
Elevator motor encoder
Offset home sensor
Staple home sensor
Paper entry sensor
Reverse paper exit sensor
Upper transport PG open/close sensor
Transport sensor 1
Transport sensor 2
8 – 9
CHPS Holder home sensor
SHPSW Stapler home switch
PSFSU Stapler paper sensor
SSFSU Stapler empty sensor
SSSW Joint section door sensor
SCSW Staple unit section door sensor
PFD3 Transport sensor 3
PFD4 Transport sensor 4
T3OD Tray 3 paper exit sensor
STID Staple tray paper entry sensor
STPD Staple paper sensor
T1PF Tray 1 paper full sensor
T3UP Tray 3 upper limit sensor
T3DN Tray 3 lower limit sensor
LSTS Stapler sensor
NCTS Staple cartridge sensor
PWD Power off detection
DSW1 Copier connection detection
DSW2 Top door open/close detection
DSW3 Front door open/close detection
AR-405
1/21/1999