Sharp AR-280 Service Manual page 53

AR-405
[SPF installed]
DSS empty sensor
DFD resist sensor
RDD paper exit sensor
AUOD DF open/close sensor
TSS1 tray feed size sensor (large size)
TSS2 tray feed size sensor (small size)
DWS1 tray width sensor (182mm)
DWS2 tray width sensor
(210mm/215.9mm)
DWS3 tray width sensor (257mm)
DWS4 tray width sensor (279.4mm)
DWS5 tray width sensor (297mm)
Note
2 - 3 Purpose Operation test/check
Function Used to check the operation of the loads in the RADF/ADF/SPF units and the control circuits.
(Purpose)
Section ADF/RADF/UDH/SPF
Item Operation
Operation/ 1. The names of the loads which can be operated are displayed. Select the load to be checked with the key, and the
Procedure selected load is highlighted.
2. Press the [EXECUTE] key.
The load selected in procedure 1 starts the operation. During the operation of the load, the [EXECUTE] key is
highlighted. If the EXECUTE key is pressed while it is highlighted, the operation is stopped.
When two or more operations are selected in procedure 1, the operation is performed in the sequence of display
order.
[When ADF/RADF is installed]
DFM
DFM
DTM
DTM
DRM
DFSOL
[When SPF is installed]
DTM
DTM
STAMP
Note
1/21/1999
FORWORD Paper feed motor forward rotation
REVERSE Paper feed motor reverse rotation
FORWORD Transport motor forward rotation
REVERSE Transport motor reverse rotation
Paper expulsion motor
Paper feed solenoid
FORWORD Transport motor forward rotation
REVERSE Transport motor reverse rotation
SOL Stamp solenoid
Normal display: Document empty
Normal display: Document empty
Normal display: Document empty
Normal display: Close
Normal display: Document empty
Normal display: Document empty
Normal display: OFF
Normal display: OFF
Normal display: OFF
Normal display: OFF
Normal display: OFF
8 – 8
Highlighted display: Document exist
Highlighted display: Document exist
Highlighted display: Document exist
Highlighted display: Open
Highlighted display: Document exist
Highlighted display: Document exist
Highlighted display: ON
Highlighted display: ON
Highlighted display: ON
Highlighted display: ON
Highlighted display: ON