Sharp AR-280 Service Manual page 88

26 - 36 Purpose Setting
Function Used to set the ICU fan operating temperature. (Operation in pre-heat mode.) (Excluding Japan models.)
(Purpose)
Section ICU
Item Operation
Operation/ Used to set the threshold value of the ambient temperature for turning ON the ICU fan motor in the pre-heat
Procedure mode.
Set range:
Default:
Enter the operating temperature with the 10-key pad and press the [OK] key.
Note
26 - 41 Purpose Setting
Function Used to enable/disable the auto magnification ratio select (AMS) function in the pamphlet copy mode.
(Purpose)
Section
Item Specifications
Operation/
Procedure
Note
26 - 44 Purpose Setting
Function Used to set the model of the unit which is connected to the SCSI I/F of ICU PWB.
(Purpose)
Section ICU
Item Specifications
Operation/ A is at the left of B when viewed from the rear side.
Procedure
0: No connection
1: Printer controller
3: External printer controller (Not used)
4: Scanner controller (Not used)
8: (Not used)
One SCSI channel available
Note
0~33[˚C]
30[˚C] (30)
8 – 43
Operation mode (Common)
Interface/Communication
Two SCSI channels available
AR-405
1/21/1999