Sharp AR-280 Service Manual page 62

Note
7
7 - 1 Purpose Setting/Operation test/check
Function Used to set the aging operation conditions.
(Purpose)
Section
Item Operation
Operation/ 1. Press each corresponding key to set for the aging operation.
Procedure (Set items of each key)
[AGING]
[MISFEED DISABLE]
[FUSING DISABLE]
[WARMUP DISABLE]
[INTERVAL]
[DV CHECK DISABLE]
[SHADING DISABLE]
The selected key is highlighted.
2. Press the [EXECUTE] key.
Aging is set and the display returns to the simulation main code entry display.
* When this simulation is executed, the machine resumes operation regardless of setting (changing) of aging.
Note
Aging setting
Jam detection enable/disable setting
Fusing operation enable/disable setting
Warm-up save setting
Intermittent setting (Valid only in [AGING] setting)
Developing unit detection enable/disable setting
Shading enable/disable setting
8 – 17
AR-405
1/21/1999