Sharp AR-280 Service Manual page 86

Set value
0
1
2
Note
26 - 18 Purpose Setting
Function Used to set VALID/INVALID of toner save operation. (This simulation is valid only in the Japan and UK versions.
(Purpose) (It depends on SIM 26-6 (Destination setting). For the other destinations, the same setting can be executed with
the user program.)
Section
Item Specifications
Operation/ Enter the code number corresponding to the condition (the toner save YES/NO) with the 10-key and press the
Procedure [OK] key.
Set value
0
1
Note
26 - 22 Purpose Setting
Function Used to set the specification (language display) for the destination. (Target models: AR-280/285/335) (Excluding
(Purpose) the Japan models.)
Section
Item Specifications
Operation/ Select the language to be used according to the table below.
Procedure
Display
ENG.(US)
ENG.(UK)
FRENCH
SPANISH
GERMAN
Remedy mod
Normal operation (Default)
Remedy mode 1 a. Racing until the specified fusing temperature is reached.
Remedy mode 1 a. Racing is performed until the specified fusing temperature is reached.
b. Copy mode is duplex mode or sort.
Group mode
• Previous rotation is made for 5 sec before starting copying.
Toner save
YES
NO (Default)
Language
English(US)
English(UK)
French
Spanish
German
8 – 41
Fusing condition
Operation mode (Common)
AR-405
1/21/1999