Positioning Reflective Originals - Microtek Bio-5050 User Manual

Positioning Reflective Originals

This procedure applies when you use the upper scan bed of the Bio-5050 to scan
paper reports, prints, or other reflective materials.
1. Open the scanner lid.
2. Place the original to be scanned face down on the scanner glass surface
3. Lower the scanner lid.
18 Bio-5050 Scanner User's Manual
(upper scan bed), towards the front of the scanner. Center the top of the
material original along the horizontal ruler on the scanner.
NOTE: To scan a book or thick materials/documents, lift the scanner lid out
of its hinge sockets high enough to create room between the original and the
lid.