Table of Contents
Advertisement
To apply the Auto Focus function to the image, use either of the ways
below:
•
The area applied with the Auto Focus function is decided and selected
by the software system automatically.
Click the Overview button to perform a preliminary scan of the image,
which will appear in the Preview window. Immediately, you can see a
target sign
( )
the area where the Auto Focus is applied to. In this case, the software
system automatically detects, calculates and selects the area applied
with the Auto Focus function.
See illustration on previous page.
•
Select and apply the Auto Focus function to a specific area of the scan
frame by yourself
a)
Select the Scan Frame tool from the Toolbar, and choose the area to
be scanned by dragging a rectangle around it.
b)
Select the Auto Focus tool from the Toolbar, and choose the area in
the scan frame to which the AF function will be applied. A redefined
Auto Focus frame (bordered in red) will appear within the scan
frame, labeled with the tag "AF".
NOTE: The AF frame works only in the area defined by the scan frame.
3. In the Preview window, click the Prescan button. This will give you a more
detailed view of the image area in which the AF function is applied.
4. If necessary, follow the steps in the previous scanning scenarios to define
scan settings for your image.
5. Click the Scan to button in the Preview window to start the final scan. This
final scan process will include the Auto Focus function to make the image
look clearer and sharper.
appearing on the overview image. The target sign marks
Bio-5050 Scanner User's Manual
Fous on a
manually
selected
area by
yourself
Scan frame
(enclosed by
dotted lines)
27
Advertisement
Table of Contents
