Step 2: Installing The Software - Microtek Bio-5050 User Manual

Step 2: Installing the Software

Important: Do not remove the yellow sticker from your scanner until you are told
to do so. You must install all software before connecting your scanner.
Always close any open programs and turn off Anti-virus utilities before installing
software.
1. Turn on your computer.
2. Place the Microtek Software DVD
3. Follow the on-screen instructions
4. Click "EXIT" on the Microtek
5. Restart your computer.
12 Bio-5050 Scanner User's Manual
into a drive.
to install the driver and software.
NOTE: If the Microtek Software
Installer screen does not come
up automatically, double-click
the following in succession: "My
Computer"; the DVD-ROM icon;
then cdsetup.exe to start the
installer program.
Software Installer screen when all
the software has been installed.