Positioning Your Originals; Positioning Reflective Originals - Microtek ScanMaker i450 Supplement Manual

Positioning Reflective Originals

To scan reflective originals such as photos and printed matter, use the Black Mat
came with your scanner package.
1. Raise the scanner lid, and place the photo to be scanned face down on the scanner
2. Place the Black Mat that came with your scanner on top of the photo, then lower
6 ScanMaker i450 Supplement

Positioning Your Originals

glass surface. Position the top end of the photo towards the back of the scanner.
the scanner lid on the scanner glass surface.
Note: Use of the Black Mat on top of your photo filters out unwanted light during
scanning, and ensures the correct functioning of the automatic cropping feature
when you do a preview scan.