Xylem FLYFT P7900 Installation, Operation And Maintenance Manual page 65

6.8.3.3 Install the propeller
1
2
3
4
5
1. Install the O-ring.
2. Remove the plug.
3. Install the lifting eye unit.
4. Lift the propeller.
5. Align the holes of the propeller hub with the holes of the propeller.
6. Lubricate the screws.
Lubricant: Loctite No. 4KM51
7. Install and tighten the screws in sequence:
P7900 Installation, Operation, and Maintenance Manual
6 Maintenance
1. Lifting eye unit
2. Plug
3. Screws
4. O-ring
5. Propeller
63